 |
| COMPLETE KIT PRICING |
USD
|
CAD
|
| Regular kit (with conventional gear) |
n/a
|
n/a
|
| |
|
|
| PROGRESSIVE BUILDING KITS PRICING |
USD
|
CAD
|
|
Empennage kit (Rudder & Stabilizer)
Wings kit
Fuselage kit
Progressive building kits total price
|
n/a
n/a
n/a
n/a
|
n/a
n/a
n/a
n/a
|
| |
|
|
| CRATING AND HANDLING |
USD
|
CAD
|
|
COMPLET REGULAR KIT
PROGRESSIVE KIT: TAIL
PROGRESSIVE KIT: WINGS
PROGRESSIVE KIT: FUSELAGE
|
1,475 $
n/a
n/a
n/a
|
1,434 $
n/a
n/a
n/a
|
| |
|
|
| |
|
|
| OPTIONS |
USD
|
CAD
|
|
QuickBuild kit option (click here to see a photo)
Tricycle gear option
|
24,300 $
3,420 $
|
25,750 $
3,624 $
|
| |
|
|
| Engine mount |
1,820 $
|
1,927 $
|
| Cowling with nose bowl |
985 $
|
1,042 $
|
| Cargo Door (click here to see pictures of the cargo door) |
485 $
|
510 $
|
| WHELEN Nav/Strobe light, power supply and tail light kit (see picture) |
1,170 $
|
1,240 $
|
| 600 x 6 Wheels kit (Wheels, calipers, axles with nuts, bolts kit) (see picture) |
1,283 $
|
1,360 $
|
| Stainless Steel reinforced brake lines (kit of 6) (see picture) |
710 $
|
753 $
|
| |
|
|
| NOTES: Prices subject to change without notice. |
| |
|
|
| KITS DESCRIPTION |
|
|
|
Regular kit:
The complete regular kit contains all the components you will need to
assemble your TUNDRA, from the firewall back:
- Control systems: cables, rod ends, pulleys, sticks, rudder pedals & brake cylinders (both sides), flap handle, trim system, hinges, full aviation quality hardware kit.
- Fuel system: fuel lines, valves, fittings, fuel selector, welded and pressure tested aluminum tanks.
- Fairings, outside finishing and hardware: Molded 3/16” thick windshield, windows, doors, empennage fairings, wingtips, spring aluminum landing gear from Grove (gun drilled for brake fluid), wing struts.
- Inside finishing and hardware: seat frames, seat tracks, aluminum panels (inside finishing), aluminum floor panels, baggage compartment finishing, empty instrument panel.
Progressive building kits: (NO LONGER AVAILABLE AS OF JANUARY 1st 2011)
Each progressive building kits contains all the components you will need to assemble any particular kit. In addition to all the aluminum and steel parts, those sub-kits contains all the hardware, hinges, pulleys, calbes, fairings to complete the kit.
- Empennage kit (tail kit) : contains all the pre-punched parts needed to complete the stabilizer and rudder (ribs, spars, skins, doublers and stiffeners), plus a full hardware kit containing all the rivets, hinges, nuts and bolts and everything needed.
- Wings kit : contains all the pre-punched parts needed to complete both wings (ribs, spars, skins, doublers and stiffeners), the fuel tanks, control cables & pulleys, the wingtips and a full hardware kit.
- Fuselage kit : contains all the pre-punched parts needed to complete the fuselage and cabin sections, plus anything that is included with the complete regular kit that was not needed for the prior sub-kit assemblies.
Options:
The options are not included with the complete regular kit or with any sub-kits. They are purchased seperately and their pricing is in addition to the kit pricing in the price list.
- Tricycle gear option : Each and every TUNDRA kits come with a double floor with attachment points for either a conventional gear or a tricycle gear configuration. The tricycle gear option contains all the doublers and stiffeners for the main gear attachment, the engine mount with the nose gear attachment and the nose gear leg with wheel attachment.
- QuickBuild option : The QuickBuild option contains everything that is included in the complete regular kit. With this option, most of the parts are already debured, primed and assembled. The cabin and fuselage are assembled with the exception of one skin on the fuselage. Both wings are assembled with the exception of the bottom skins. The empennage section is assembled with only a few rivets left to do. The QuickBuild option will reduce the assembly time by approximately 700 hours. Click here to see a photo of a TUNDRA kit with the QuickBuild option.
- Engine mount: The engine mount is engineered to fit any , O-360 or IO-360, IO-390 engines.
- Cowling with nose bowl: The cowling with nose offered is made to fit any , O-360 or IO-360, IO-390 engines.
|
| |
|
|
|
|
